Product Technical Spec.
Body Material:
Any acceptable
Body Style:
Standard round b
Shoulder Diameter:
Between 1.3115 inches and 1.3120 inches
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Flange Diameter:
Between 1.4360 inches and 1.4370 inches
Flange Thickness:
0.0930 inches
Undercut Width:
Between 0.0680 inches and 0.0880 inches
Shaft Diameter:
0.1195 inches single shaft and 0.1200 inches single shaft
Shaft Length:
0.5400 inches single shaft
Fragility Factor:
Moderately rugged
Stator Input Voltage Rating In Volts:
Between 10.6 and 12.0
Stator Input Current Rating:
115.0 milliamperes
Stator Input Electrical Power Rating:
170.0 milliwatts
Frequency In Hertz:
Between 400.0 and 408.0
Zro Resistance In Ohms:
Between 64.60 and 87.40
Zso Resistance In Ohms:
Between 12.05 and 14.95
Rotor Dc Resistance In Ohms:
Between 38.80 and 50.40
Stator Dc Resistance In Ohms:
Between 8.64 and 11.88
Phase Shift Angle In Deg:
Between 5.600 input to output and 8.500 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
40.00
Actuator Friction Torque At Minus 55 Deg Celsius:
15.00 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
4.00 centimeter-grams
Pilot Length:
0.0400 inches
Shoulder Length:
0.1320 inches
Mounting Surface To Terminal End Distance:
1.6320 inches
Plus J Zro Reactance In Ohms:
Between 468.00 and 572.00
Plus J Zso Reactance In Ohms:
Between 79.20 and 96.80
Shaft Type:
Round, slotted single shaft
Alignment Hole Depth:
0.0950 inches
Alignment Hole Bolt Circle Diameter:
0.8750 inches
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro,control Transformer
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
